The following is a list of various joinery methods that, when done properly, will securely fasten two boards together with no metal fasteners whatsoever. just a little know-how, some tools and probably a bit of glue to secure the joint.. All one must do is use screws to attach two pieces of wood at their respective ends. although this method is preferred for its simplicity, it does leave the screws uncovered. to avoid having the screws come loose, thus causing the joint to fail, either countersink them or apply putty.. The pocket joint is a type of wood joinery that involves cutting a slot and pre-drilling a pilot hole at an angle between two boards before connecting the two with a screw. this pre- drill ing needs to be very accurate, so it is typically accomplished by use of a commercial jig..
How kreg joints™ work. kreg joinery™ is an incredibly fast, strong, and simple way of joining wood. it essentially involves drilling a hole at an angle into one workpiece, and then joining it to a second workpiece with self-tapping screws.. A finger joint or box joint is one of the popular woodworking joints. you use it to join two pieces of wood at right angles to each other. it is much like a dovetail joint except that the pins are square and not angled.. After gluing the the two pieces of wood in position with wood glue and holding the joint until it's reasonable stable, drill two pilot holes through the joint so the wood doesn't split. the holes must be the same size as the dry-wall screws..
0 komentar:
Posting Komentar